header image
Articles
Store
Home » Store » RainbowImaging (FC314) 3.6M /10 TTL Off-Camera Shoe Cord for Olympus / Panasonic Camera & Flashes, fits Olympus Flashes FL-20, FL-36, FL-36R, FL-50, FL-50R
RainbowImaging (FC314) 3.6M /10 TTL Off-Camera Shoe Cord for Olympus / Panasonic Camera & Flashes, fits Olympus Flashes FL-20, FL-36, FL-36R, FL-50, FL-50R


RainbowImaging (FC314) 3.6M /10 TTL Off-Camera Shoe Cord for Olympus / Panasonic Camera & Flashes, fits Olympus Flashes FL-20, FL-36, FL-36R, FL-50, FL-50R
List Price: $35.99
Our Price: $23.99
You Save: $12.00 ( 33% )

Availability: Usually ships in 24 hours

Buy it now at Amazon.com!

Average Customer Rating: [ not yet rated ]

Binding: Electronics
Brand: Rainbow
Feature: This 3.6M cable cord provides TTL and manual mode for Olympus / Panasonic flashes when used off-camera with Canon SLR/DSLR cameras,
Model: FC314
Publisher: RainbowImaging

Features
This 3.6M cable cord provides TTL and manual mode for Olympus / Panasonic flashes when used off-camera with Canon SLR/DSLR cameras,
It can be extended as far as approximately 3.6 Meters/ 10 FT (Mzximum) away from the camera. Pls note other flashes cords may only be 1.8 meters.
Cable Unstretched length: 0.75m(1.6ft ); Cable Max stretched length: 3.3 m(10.8 ft)
Provides TTL SYNC for Olympus / Panasonic flashes with Olympus E-P2, E-P1 E-PL1, E-PL2, E-30, E-3, E-1, E-620, E-600, E-520, E-510, E-500, E-450, E-420, E-410, E-400, E-330, E-300, SP-510UZ, 550UZ, 560UZ, 590UZ, 570UZ,565 UZ; and Panasonic G1, G2, G10, GF1, GH1, GH2, MC-FZ50, DMC-FZ50K, DMC-FZ50S, DMC-FZ30, DMC-FZ30K, DMC-FZ30S, DMC-FZ20, DMCFZ20K, DMCFZ20S, LC-1.
Compatible with Olympus Flashes FL-20, FL-36, FL-36R, FL-50, FL-50R, and other third party flashguns.

Editorial Reviews:

Basic Operation: How to connect the camera with the connector 1. Please make sure the camera power is off before insert the camera connector. 2. Loosen the fixed hot shoe nut by rotating toward right. 3. Plug the camera connector and mount onto the camera hot shoe as the figure. 4. Lock the fixed hot shoe nut by rotating toward left. How to remove from camera hot shoe 1. Please make sure the camera power had been turned off before remove camera connector. 2. Loosen the hot shoe nut by rotating toward right according to the icon. 3. Pull out connector hot shoe mount from the camera accessory hot shoe. Connecting to flash unit & Operation: Install the flash connector on the tripod. 1. Plug the fixed PTZ tripod screw into the flash connector nut and tighten it according to the icon. 2. Install the flash connector hot shoe mount on the PTZ of the tripod. Install the flash connector on the flash bracket. Insert the hot shoe mount of flash connector into the flash bracket according to icon. How to connect to flash unit. 1. Please make sure the flash's power is off before you install the flash mount to the connector. 2. Insert the flash mount into the hot shoe of connector fully. 3. Slide the locking rod of the flash to the right end. 4. When the lock rod sounds like "kacha", the flash with the flash cable is locked. How to remove from the flash unit 1. Make sure the flash power is off before remove the flash. 2. When press the flash discharge lock button slide the locking rod into the left. 3. Pull out the flash installation mount from the flash connector accessory hot shoe. Flash unit operation 1. After the flash installed, adjust the flash head. 2. Open the flash power. 3. Select the flash mode. 4. Make sure the flash or camera's preparation indicator light has been lit before shooting Retail Package Includes - 1 x TTL Off Camera Flash Cord - English instruction


Related Items

This store is brought to you in association with Amazon.com